HIGH CHROME PARTS
HIGH CHROME PARTS
HIGH CHROME PARTS
HIGH CHROME PARTS
HIGH CHROME PARTS
HIGH CHROME PARTS
HIGH CHROME PARTS
FOB
Minimum Sipariş Adedi:
1
Nakliye Yöntemi:
快递, 空运, 陆运, 海运
Ürün Detayları
Sık Sorulan Sorular
Temel Bilgiler
Minimum Sipariş Adedi:1
Teslim Süresi:15-20DAYS
Nakliye Yöntemi:快递, 空运, 陆运, 海运
Ambalaj Açıklaması:WOODEN CASE PACKING
Ürün Açıklaması

 High chrome parts

Impeller is the most important part in pump operation, which is a rotor, rotating component of a centrifugal pump. There are mainly three types of slurry pump impeller: Open, Semi-open and Closed. Vanes from 2-6. Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. When the slurry pump processing the solid mixture, the most worn parts are impellers.

The Materials of the impeller are A05,A49,A33,A61, Natural Rubber, Polyurethane ,Ceramic etc according to different working conditions.

Except the standard impellers, we can do OEM and ODM service if client provide us drawings or samples.

 

Volute Liner

A volute Liner is a curved funnel increasing in area to the discharge port. It is often used with impeller pumps.As the area of the cross-section increases, the volute reduces the speed of the liquid and increases the pressure of the liquid. The main purposes of a volute casting is to help balance the hydraulic pressure on the shaft of the pump.

The Materials of the volute liner are A05,A49,A33,A61,Natural Rubber, Polyurethane, Ceramic etc according to different working conditions.

   Except the standard Volute Liner, we can do OEM and ODM service if client provide us drawings or samples.
 

Throat Bush

The throat bush links plate liner and forms a pump chamber to work with impeller.

Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.

The Materials of the throat bush are A05,A49,A33,A61,Natural Rubber, Polyurethane ,Ceramic etc according to different working conditions.

Except the standard throat bush, we can do OEM and ODM service if client provide us drawings or samples.

   

Frame Plate Liner Insert

Frame Plate Liner Insert is one of wet parts of slurry pumps, it is also called back liner since its position in slurry pump. It forms a pump chamber with throat bush and volute liner where the slurry will flow through them.

The Materials of the Frame Plate Liner Insert are A05,A49,A33,A61,Natural Rubber, Polyurethane, Ceramic etc according to different working conditions.

  Except the standard Frame Plate Liner Insert, we can do OEM and ODM service if client provide us drawings or samples

Müşteri hizmetleri

 Whatsapp: 008613931154653, Wechat:008613933871599

 Çalışma zamanı

 AM: 9:00-12:00    PM: 13:00-18:00 

Pazartesi   ile cuma. Bizimle iletişime geçmekten hoş geldiniz!

电话
WhatsApp