Industrial Valves Widely Used in EPC Projects

Created on 11.20
For EPC contractors undertaking oil & gas, petrochemical, power, LNG, water treatment and pipeline transmission projects, proper valve selection directly determines process safety, operational stability, project budget and long-term maintenance cost. As a reliable valve export supplier, we supply a full portfolio of API & ASME compliant valves to match diverse process conditions, from isolation, throttling, backflow prevention to emergency shutdown service. Below is an introduction to the most frequently specified valve types for EPC projects.
0
Ball valves
Ball valves are quarter-turn rotary valves, and one of the most preferred isolation valves for EPC process and pipeline systems. They rely on a perforated ball to cut off or connect fluid media. V-port ball valves support precise flow regulation, while three-way ball valves are used for media distribution and flow direction switching.
They feature minimum fluid resistance, fast 90° on-off operation, excellent sealing performance and easy automation. PTFE and other elastic seat materials deliver bubble-tight shut-off for clean service; metal hard-seat ball valves are available for high-temperature, abrasive and fire-safe service.Floating ball valves are generally adopted for small & medium bore, low-to-medium pressure lines. Trunnion-mounted ball valves bear media thrust via supporting trunnions, with lower operating torque, making them the standard choice for large bore, high-pressure pipeline and ESD emergency shutdown systems. Full-bore ball valves support pipeline pigging. They can be fitted with pneumatic, electric or electro-hydraulic actuators for remote control.Standards: API 6D, API 607 fire safe, ISO 15848 fugitive emission

Gate Valves

Gate valves are multi-turn linear isolation valves, designed for full open or fully closed duty, not suitable for continuous throttling. When fully opened, the flow passage is straight with negligible pressure drop, which is ideal for main pipeline isolation and pigging routes.Rising stem gate valves offer visible position indication, while non-rising stem types save installation space for compact piping layouts. Wedge gate and parallel double-disc gate designs are available. High-pressure high-temperature gate valves adopt pressure-seal bonnet structure for refinery and power plant service.Standards: API 600, ASME B16.34

Globe Valves

Globe valves are the primary option for throttling and precise flow regulation in EPC process loops. The disc moves perpendicular against the seat, creating controlled pressure drop for accurate flow adjustment.They perform well for frequent regulation service, steam lines, sampling lines and high-pressure process media. Bellows-sealed globe valves are widely specified for toxic, hazardous media to minimize fugitive emission risk.Globe valves are not recommended for large-bore main pipelines due to relatively high permanent pressure loss.

Butterfly Valves

Butterfly valves are compact quarter-turn valves with a rotating disc inside the body. They are cost-effective and lightweight for large-diameter pipelines, commonly used for cooling water, air, flue gas and general process fluid regulation & isolation.Double-offset and triple-offset butterfly valves deliver metal-to-metal tight sealing for high temperature, vacuum and fire-safe service. They are widely adopted in large-scale power, chemical and water EPC projects where space and budget are constrained.Standards: API 609

Check Valves (Non-Return Valves)

Check valves work automatically to prevent reverse flow, protecting pumps, compressors and upstream process equipment from damage caused by backflow and water hammer. Swing check valves, lift check valves and dual-plate wafer check valves are mainstream types for EPC packages. Slow-closing damping check valves are selected for high-flow systems to suppress water hammer surges. They are mandatory accessories at pump outlets, compressor discharge lines and cross-connection pipelines.

Core Selection Guidance for EPC Inquiries

When you submit RFQ or datasheet for EPC procurement, we suggest confirming these key parameters:
  1. Design code, pressure class, size (DN/NPS), end connection (RF flanged, RTJ, butt weld, wafer)
  2. Medium, design temperature, design pressure, sour service / cryogenic requirement
  3. Body & trim material: WCB, LCC, F316L, duplex, super duplex, alloy steel etc.
  4. Seat type: soft seat / metal hard seat, fire safe, fugitive emission requirement
  5. Actuator type: manual, pneumatic, electric, hydraulic, with limit switch or solenoid if needed
  6. Documentation: EN10204 3.1 certificate, PMI, NDT, hydro & gas test report, NACE certificate if required
We understand EPC projects require strict schedule control, traceable documentation and unified technical compliance. Our engineering team reviews each valve datasheet carefully, provides technical quotation and customized valve solutions, and supports bulk MTO delivery for global EPC contractors.
If you have special requirements for cryogenic, sour service, subsea or severe service valves, share your valve datasheet with our team, and we will offer optimized, code-compliant proposals.
Contact
Leave your information and we will contact you.
电话
WhatsApp