Essential details
MOQ:1
Lead time:30days
Shipping:Express delivery, air freight, land transportation, sea freight
Product Introduction
Product Overview
Models AH, AHP, AHR, HP, M, MR, H and HH are cantilevered horizontal centrifugal slurry pumps.
These pumps are applicable for conveying highly abrasive high-concentration slurry in industrial sectors including metallurgy, mining, coal, electric power, building materials and other fields, and can also be used in series in multi-stage configurations. For Models AH, M and HH, the shaft seal can adopt packing seal or centrifugal seal. The discharge outlet of the pump can be installed at eight different angles at 45° intervals as required.
Models AH, AHP, AHR, HP, M, MR, H and HH are cantilevered horizontal centrifugal slurry pumps.
These pumps are applicable for conveying highly abrasive high-concentration slurry in industrial sectors including metallurgy, mining, coal, electric power, building materials and other fields, and can also be used in series in multi-stage configurations. For Models AH, M and HH, the shaft seal can adopt packing seal or centrifugal seal. The discharge outlet of the pump can be installed at eight different angles at 45° intervals as required.
The recommended flow range for selection is as follows:
For AH and M-type pumps:
- For high-concentration, highly abrasive slurry: 40–80%
- For medium-concentration, moderately abrasive slurry: 40–100%
- For low-concentration, low-abrasive slurry: 40–120%
For AH and M-type pumps:
- For high-concentration, highly abrasive slurry: 40–80%
- For medium-concentration, moderately abrasive slurry: 40–100%
- For low-concentration, low-abrasive slurry: 40–120%
For HH-type pumps:
- For medium-concentration, moderately abrasive slurry: 40–80%
- For low-concentration, low-abrasive slurry: 40–100%
(Note: The flow rate corresponding to the highest efficiency point at a given speed is defined as 100%)
- For medium-concentration, moderately abrasive slurry: 40–80%
- For low-concentration, low-abrasive slurry: 40–100%
(Note: The flow rate corresponding to the highest efficiency point at a given speed is defined as 100%)
We can supply many models including in 1.5/1B-AH ,3/2C-AH, 3/2D-HH, 4/3C-AH, 8/6E-AH, 10/8E-AH,10/8ST-AH, 12/10ST-AH, 14/12ST-AH and so on. Welcome to contact with us for details.